Silica gel desiccant
Silica Gel Desiccant (OEM&ODM)
Silica gel desiccant is a highly active adsorption material.It is usually made of reacting with sodium silicate an sulfuric acid,aging as well as acid bubble.It is insoluble in water and any solvents.Non-poisonous and tasteless,chemical stability.
It won't react with any material except alkali and hydrofluoric acid.Standard silica gel desiccant package is referred to as being non-indicating. As absorbs moisture it remains physically unchanged.
Non-indicating silica gel is both cheap and effective, available loose in bulk packs or packed in sachets.
Silica Gel Feature
1. It will adsorb up to 34%of its own weight in water vapor. This adsorption efficiency is approximately 30 greater than typical desiccant clay, making silica gel the preferred choice where weight or efficiency are important factors.
2. It has an almost indefinite shelf life if stored in airtight conditions.
3. It can be regenerated and reused if required. Gently heating silica gel will drive off the adsorbed moisture and leave it ready for reuse.
4. It is a very inert material, it will not normally attack or corrode other materials and with the exception of strong alkali and hydrofluoric acid is itself resistant to attack.
5. It is most frequently and conveniently used packed in a breathable sachet or bag. These are available in a wide range of sizes suitable for use with a wide range of applications.
Chemical Character
| NO. | Items | Typical Values |
| 1 | Qualification of granularity | >=98% |
| 2 | Attrition rate | <=4 |
| 3 | Bulk density | >=750g/1 |
| 4 | Resistivity | >=3000 |
| 5 | PH value | 5.6-8 |
| 6 | Color | Crystals of transparency |
| 7 | Moisture content | <=3% |
| 8 | Diameter | 1-3MM 2-4MM 3-5MM |
Packing and Shipping
| Items(grams) | L*W(mm) | Packaging(pcs/ctn) | Carton size(cm) | 1*20FCL(CTNS) |
| 0.5 | 20*40 | 20000 | 40*32*31 | 800 |
| 1 | 40*30 | 10000 | 40*32*28 | 800 |
| 2 | 48*35 | 6000 | 40*32*28 | 800 |
| 3 | 50*45 | 5000 | 40*32*31 | 800 |
| 5 | 58*45 | 3000 | 40*32*28 | 800 |
| 8 | 75*45 | 2000 | 40*32*28 | 800 |
| 10 | 68*65 | 1500 | 40*32*31 | 800 |
| 15 | 80*65 | 1000 | 40*32*25 | 800 |
| 20 | 89*65 | 1000 | 40*32*28 | 800 |
| 25 | 92*65 | 800 | 40*32*31 | 800 |
| 30 | 80*90 | 600 | 40*32*28 | 800 |
| 50 | 80*117 | 400 | 40*32*28 | 800 |
| 100 | 100*150 | 200 | 40*32*28 | 800 |
| 200 | 160*160 | 100 | 40*32*28 | 800 |
| 250 | 160*170 | 100 | 40*32*28 | 800 |
| 500 | 160*210 | 50 | 40*32*25 | 800 |
| 1000 | 200*600 | 25 | 40*32*25 | 800 |
| 2000 | 180*720 | 25 | 40*32*28 | 800 |
FAQ
How can silica gel work when it's inside a sachet ?
The materials used to make silica gel sachets are specifically chosen to be breathable.
Water vapor passes through them to be adsorbed by the silica gel.
Does silica gel comes ready to use ?
Yes. The silica gel does not need to be 'generated' before use.
It is always sold (loose or in sachets) in a dry condition, ready for use.
How long can silica gel be usefully stored ?
The shelf life of silica gel is around 12 months (although practical experience has shown that it can often far exceed this). The crucial factor is to keep it in a sealed environment until it is needed for use - it will, of course, adsorb moisture from any environment.
How long can silica gel be usefully stored ?
Silica gel will adsorb up to 34% of its own weight in moisture.
Is silica gel dangerous ?
Non-indicating (white) silica gel is non-toxic and non-flammable, it is very inert with a very high melting point.It is very much like sand and thus can safely be sent by any means of transport.
Does silica gel get wet as it adsorbs water ?
No it doesn't, it traps water molecules inside its pores yet remains dry and appears physically unchanged.
Silica gel is a desiccant then ?
Yes, it adsorbs water vapor by physical means, not a chemical reaction.
Water vapor is attracted inside the silica gels crystalline structure.
How to determine the dosage of desiccant ?
Desiccant dosage depends on many factors :Size of dry dimensional, performance of packaging material, storage environment of packaged gods, atmospheric conditions of seal, shelf of packaged goods and seal degree of packing and so on.
Company Information
D&X Profile
Dongguan Dingxing Industry Co.,Ltd was established in year of 1997. We specialize in the production of various different desiccants, such as silica gel, montmorillonite, activated clay, calcium chloride and activated carbon, anti mold sticker, humidity indicator cards and dehumidifier box etc.
Our Advantage
1. Strong R&D: one new product per 6 months by desiccants solution engineers, own reliability testing lab (TEMP&HUMI chamber).
2. Huge production capacity: skilled workers and 80 sets of advanced automatic packing machines and 20 sets printing machines.
3. Third part certified factory: TUV, ISO9001:2008, ISO14000:2008.
Dongguan Dingxing Industry Co., Ltd.
Cathy Ding
Skype:absorbdx05
Whatsapp: +86 13642389380
Tel: 86-769-86667549(ex8812)/86732892 Fax: 86-769-86731589
Website: www.dg-dx.com www.toponedry.com
Address: Qiaofeng industrial zone, Xialang , Qishi town,
Dongguan City, Guangdong province, China
Silica gel desiccant
){kind=link}